Cable Standards
Enter content here.
| BS125 | Electric conductors, copper and copper-cadmium, for overhead transmission |
|---|---|
| BS215 | Electric conductors, aluminium and steel-cored aluminium |
| BS4066 | Electric cables, tests under fire conditions |
| BS 2 E 21 | Pren type electric cables for aircraft |
| BS6007:2006 | Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring |
| BS6141:1991 | Flexible conductors, for high temperature zones - this standard has been withdrawn and replaced by tables in BS 6004:2000, BS 6007:2000, BS 6500:2000 and BS 7919:2001 |
| BS6195:2006 | Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads |
| BS6346:1997 | Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V |
| BS6360:1991 | Specification for conductors in insulated cables and cords . This standard is obsolescent and will be replaced by BS EN 60228 |
| BS6469:section 99.1:1992 | insulating, sheathing materials of electric cables, non electrical tests |
| BS6480 | Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V |
| BS6883:1999 | Elastomer insulated cables for fixed wiring in ship. |
| BS60228:2005 | Conductors of insulated cables |
| BS7629 PART 1 | Specification for 300/500V fire resistant electric cable having low emission of smoke and corrosive gases when affected by fire - multicore Cables |
| BS7629 PART 2 | Specification for 300/500V fire resistant electric cable having low emission of smoke and corrosive gases when affected by fire - multipair Cables |
| BS7870 | LV and MV polymeric insulated cables for use by distribution and generation utilities. General |
| BS7889 | Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V |
| BS7884:1997 | Specification for copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems |
| DIN VDE 262 | XLPE insulated and PVC sheathed installation cable up to 0.6/1kV |
| DIN VDE 266 Part 3 and 4 | Halogen free cables with improved characteristics in the case of fire - nuclear power plants |
| DIN VDE 267 | Halogen free cables with improved characteristics in the case of fire - nominal voltages 6 to 30kV |
| DIN VDE 271 | PVC insulated cables rated voltages up to and including 3.6/6 (7.2)kV |
| DIN VDE 276 Part 603 | Distribution cables of nominal voltages Uo/U 0.6/1kV |
| DIN VDE 276 part 604 | Power cables of nominal voltages Uo/U 0.6/1kV with special fire performance for use in power stations |
| DIN VDE 276 part 604/605 | Additional test methods |
| DIN VDE 276 part 620 | Distribution cables of nominal voltages Uo/U 3.6kV to 20.8/36kV |
| DIN VDE 277 | Airport Lighting |
| DIN VDE 281 part 1 to part 404 | PVC cables, wires and flexible cords for power installation |
| DIN VDE 282 part 1 to part 808 | Rubber cables and flexible cords for power installation, heat resistant silicon rubber insulated cable, halogen free insulated cable, arc welding cable, rubber insulated lift cable, rubber sheathed flexible cables |
| EIA RS 232 | TIA/EIA standard for serial transmission between computers and peripheral devices |
| RS 422 | Electrical characteristics of the balanced voltage digital interface circuit |
| TIA/EIA 568 | Commercial Building Telecommunications Wiring Standard Part 1 : General Requirements |
| BS6121 | Mechanical cable glands |
| BS5308 Part 1 | Insulated cables, instrumentation, intrinsically safe |
| BS5308 Part 2 | Insulated cables, instrumentation, intrinsically safe |
| BS5467 | Power Cables, armoured thermosetting-polymer insulated, for electricty supply. |
| BS6004 | Insulated cables, PVC insulated, non-armoured |
| BS6231:2006 | Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and control gear wiring |
| BS638:Pt4:1996 | Arc welding power sources, equipment and accessories. Specification for welding cables |
| BS6500:2000 | Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments |
| BS6622:1999 | Cables with extruded cross linked polyethylene or ethylene propylene rubber insulation 3.8/6.6kV to19/33kV |
| BS6724:1997 | 600/1000V,1900/3300V armoured electric cable with thermosetting insulation and low emission smoke, gases |
| BS7211:1998 | Thermosetting insulated cables, non armoured, with low smoke and gas |
| BS7835 | Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire |
| BS7919:2001 | Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments |
| CSA 22.2 No 127 Type TEW | Equipment and Lead Wires |
| CW1128 | Specification CW 1128 for cable polyethylene twin and polyethylene twin - screened |
| Generally to BS6004 | Insulated cables, PVC insulated, non-armoured |
| Generally to BS6500 | Flexible cables, insulated cords and cables |
| H03VV-F | Circular, PVC insulation/PVC sheathed, 300/300V, to BS6500. |
| H05BN4-F | Single Core, Rubber Insulated, HOFR Sheathed, 450/750V |
| H05V-K | Single Core, PVC Insulated Only, 300/300V |
| H05VV-F | PVC Insulated and Sheathed, 300/500V |
| H07BN4-F | Single Core, Rubber Insulated, HOFR Sheathed, 450/750V |
| H07V-K | Single Core, PVC Insulated Only, 450/750V, Flexible Conductor |
| H07V-R | Single Core, PVC Insulated Only, 450/750V, Stranded Conductor |
| IEC60598-1 | Luminaires - General requirements and tests |
| UL 758 | Appliance Wiring Material |
| DIN VDE 250 Part 1 to Part 819 | Cables, wires and flexible cords for power installation |
